BKDWR - TRIPLE EXPANDING POLYURETHANE FOAM 12 OZ.

  • MSDS: BKDWR
  • Manufacturer: MACKLANBURG DUNCAN
  • Product Name: TRIPLE EXPANDING POLYURETHANE FOAM 12 OZ.
  • National Stock Number: 8030-00F015717
Product Identification

Product ID:TRIPLE EXPANDING POLYURETHANE FOAM 12 OZ.
MSDS Date:05/26/1989
FSC:8030
NIIN:00F015717
MSDS Number: BKDWR

Responsible Party
MACKLANBURG-DUNCAN
4041 NORTH SANTA FE
OKLAHOMA CITY, OK 73118

Emergency Phone: (405) 528-4411

Info Phone: (405) 528-4411

Cage: 82464

Contractor
MACKLANBURG-DUNCAN
OKLAHOMA CITY, OK 73118-0188 US

Telephone: 800-654-8454 / 405-528-4411

Cage: 82464

Ingredients

URETHANE PREPOLYMER

CAS: 9040-80-6

Fraction By Weight: 50%


SILICONE SURFACTANT

Fraction By Weight: 2%


FLAME RETARDANT

Fraction By Weight: 20%


METHYLENE BISPHENYL ISOCYANATE (MDI) (SARA III)

CAS: 101-68-8

RTECS: NQ9350000

Fraction By Weight: 15%

OSHA PEL C, 0.02 PPM

ACGIH TLV: 0.005 PPM; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


HIGHER OLIGOMERS OF MDI, POLYMETHYLENE POLYPHENYLENE

CAS: 9016-87-9

RTECS: TR0350000

Fraction By Weight: 15%


CHLOROFLUOROALKANE BLEND

Fraction By Weight: 35%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM


CATALYST

Fraction By Weight: 5%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION & DISCOLORATION. EYE:
IRRITATION, CORNEAL & PHYSICAL DAMAGE. INHALATION: BREATHLESSNESS,
CHEST DISCOMFORT, IRRITATION OF MUCOUS MEMBRANES, HEADACHE,
COUGHING, ASTHMA-LIKE ALLERGIC REA CTION & REDUCED PULMONARY
FUNCTION. INGESTION: IRRITATION & CORROSIVE ACTION IN MOUTH &
DIGESTIVE TRACT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: REDDENING, SWELLING, BLISTERING,
SENSITIZATION, DERMATITIS & ADHERENCE. EYE: IRRITATION, CORNEAL &
PHYSICAL DAMAGE. INHALATION: BRONCHITIS, BRONCHIAL SPASM, &
PULMONARY EDEMA. INGESTION: IRRITAT ION & CORRSIVE ACTION IN MOUTH
& DIGESTIVE TRACT.
Medical Cond Aggravated by Exposure:CHRONIC RESPIRATORY PROBLEMS

First Aid

First Aid:EYES: FLUSH W/WATER FOR 15 MINS. SKIN: WASH IMMEDIATELY
W/ABRASIVE SOAP, ACETONE OR ALCOHOL. AFTER PRODUCT CURES IT CAN
ONLY BE REMOVED MECHANICALLY. USE AN ABRASIVE CLEANSER & A STIFF
VEGETABLE BRUSH . INHALATION: TREAT SYMPTOMATICALLY W/VASO-DILATORS
& OXYGEN. INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:COC
Flash Point:390.2F
Extinguishing Media:CO2, FOAM, DRY CHEMICAL, HIGH EXPANSION CHEMICAL
FOAM.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS IN
POSITIVE PRESSURE MODE & FULL PROTECTIVE GEAR. COOL FIRE-EXPOSED
CONTAINERS W/WATER.
Unusual Fire/Explosion Hazard:SEALED CONTAINERS CONTAINING FREON EXPAND
UNDER PRESSURE/EXPLODE RELEASING TOXIC GASES/AEROSOLS. REACTION
W/WATER AT ELEVEATED TEMPERATURES CAN BE VIOLENT.

Accidental Release

Spill Release Procedures:COVER W/ABSORBENT MATERIAL (SAWDUST). PLACE IN
OPEN TOP CONTAINER OR PLASTIC SHEET. AFTER CURING, MATERIAL CAN
ONLY BE REMOVED MECHANICALLY.

Handling

Handling and Storage Precautions:DON'T STORE NEAR HEAT
SOURCES/SPARKS/FLAMES/CARS/CAR TRUNKS/DIRECT SUNLIGHT/TEMPS ARE
>120F. READ/UNDERSTAND ALL DIRECTIONS.
Other Precautions:USE ENTIRE CAN OF FOAM W/IN 30 DAYS OF INITIAL
APPLICATION. IF STORED AT TEMPS <40F, CONTENTS MAY SEPARATE. SHAKE
CAN VIGOROUSLY TO RECOMBINE. DON'T INGEST. KEEP AWAY FROM CHILDREN.
AVOID CONTACT W/SK IN. USE IN WELL VENTILATED AREAS.

Exposure Controls

Respiratory Protection:USE A NIOSH APPROVED CARTRIDGE RESPIRATOR.
Ventilation:PROVIDE ADEQUATE MECHANICAL VENTILATION TO KEEP Protective Gloves:CHEMICAL RESISTANT RUBBER, PLASTIC
Eye Protection:SAFETY GOGGLES, FACE SHIELD
Work Hygienic Practices:WASH SKIN & HANDS AFTER USE.
Supplemental Safety and Health

Chemical Properties

Vapor Pres:4000
Vapor Density:>AIR
Spec Gravity:1.3
Solubility in Water:INSOLUBLE
Appearance and Odor:LIGHT BROWN, FROTHY, POROUS LIQUID W/MILD
FLUOROCARBON ODOR.
Percent Volatiles by Volume:<35%

Stability

Stability Indicator/Materials to Avoid:YES
WATER, STRONG CAUSTICS, AMINES, SOME METAL COMPOUNDS, & ALCOHOLS.
Stability Condition to Avoid:WATER CONTAMINATION, FREEZING, HEAT,
TEMPERATURES >120F, HEAT SOURCES, SPARKS, FLAME, & DIRECT SUNLIGHT.
Hazardous Decomposition Products:CO2/CO/BENZENE/TOLUENE/CARBONYL
HALIDE/MDI/INORGANIC ACID/NOX/HYDROGEN
CYANIDE/ACETALDEHYDE/ACETONE/FLUOROCARBON VAPOR.
Conditions to Avoid Polymerization:MOISTURE, TEMPERATURES >400F, WATER
CONTAMINATION.

Disposal

Waste Disposal Methods:VENT CAN & DISPENSE FOAM INTO A SUITABLE WASTE
CONTAINER, ALLOW TO CURE, & DISPOSE IN A SANITARY LANDFILL IN
ACCORDANCE W/LOCAL, STATE, & FEDERAL REGULATIONS. DON'T INCINERATE
OR PUNCTURE CAN. EMPTY C AN BEFORE DISPOSAL. CONSUMER
COMMODITY,ORM-D.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.